Marking of pressure sensors and transmitters according to ATEX Guideline 94/9/EC ? how exactly to browse the ATEX label on pressure sensors

If pressure sensors, pressure transmitters and other field equipment are employed near flammable gases or dust, they might be subject to marking in accordance with the ATEX product guideline 94/9/EC. Tailspin requires the sort label of the sensor to add the ATEX marking, so usually that is labelled directly onto the sensor during production.
Close to the Notified Body and the approval number, the marking of pressure sensors also includes important information for the user. For example, an ?X? after the approval number indicates that special conditions should be observed when using the device. These are either given in the approval document and in the corresponding manual. Most importantly, marking in accordance with ATEX gives info on the possible regions of application and the type of protection useful for the pressure sensor:
Explosion group:
I Mining industry, II other areas useful Device class:
Used in zone 0/20 in the vicinity of von flammable gases (1G), dust (1D)
Use in zone 1/21 near flammable gases (2G), dust (2D)
Use in zone 2/22 in the vicinity of flammable gases (3G), dust (3D)
However, there are also devices where only certain parts may be installed in other zones, for instance, a pressure sensor marked 1/2G could be installed in a tank with flammable content. Provocative of the transmitter is located externally of the tank, and therefore in zone 1.
Examples for types of protection:
i intrinsic safety (Limitation of electrical ignition energy by limiting current and voltage)
ia for Zone 0 or Zone 20 (for Zone 20 also iaD)
ib for Zone 1 or Zone 21 (for Zone 21 also ibD)
ic for Zone 2 d
flameproof / explosion proof enclosure, ideal for zone 1/21 and 2/22 n
non-incendive, suitable for zone 2/22 m
encapsulation suitable for zone 1/21 and 2/22 Gas group and temperature class: i.e. IIC T1 for hydrogen
Note:
Further information on the subject of hydrogen can be found on the WIKA website. For those who have any more questions, your contact will gladly assist you to.

Leave a Comment