On- Unstoppable of measuring instruments is frequently very time-consuming and expensive. This is also true for applications with several measurands. One of these of this may be the metering skid, something for the custody transfer measurement of the amount of natural gas transferred. A worldwide player in the market from Saudi Arabia has significantly streamlined the testing process at this stage: with the multi-functional CPH8000-P1 calibrator from WIKA, a ?calibration laboratory in an incident?.
The center of a metering skid may be the flow computer. It processes the information from all of the measuring instruments and calculates the exact amount of gas that flows to the client. Natural gas is compressible, therefore the monitoring of pressure and temperature during gas transfer plays an essential role.
Verification is the law
Because even small measuring errors can cause noticeable losses in turnover, the measuring instruments must be calibrated regularly. This is usually done at the facility. Each on-site calibration must be verified relative to regulations. This means proving consistent repeatability of the test results and traceability to the assigned references. In addition, the regulations require the test equipment to be approved for used in hazardous areas.
In view of the requirements, the calibration personnel of WIKA customers previously had to use many different devices as a way to adequately fulfil their tasks. Besides pressure and temperature calibrators, this included a pneumatic pump for the test pressure, a HART� communicator and a resistance decoder. The on-site calibration cost time and effort accordingly.
The CPH8000-P1 multi-functional calibrator significantly reduces your time and effort required for on-site calibration.
Four measuring channels
The gas company in Saudi Arabia has reduced this effort in a single fell swoop with the CPH8000-P1 portable multi-function calibrator from WIKA. The case-mounted instrument calibrates pressure measuring instruments and also resistance thermometers and thermocouples. The test pressure is generated having an integrated pump. The CPH8000-P1 has four measuring channels. It could thus perform and display around four measurements simultaneously. The ATEX-approved version also supplies the test items and reference sensors in the metering skid with voltage (DC 24 V) without danger.
Documentation without problems
Through the test procedure, the CPH8000-P1 ? via its integrated HART� module ? communicates directly with the measuring instruments, which may also be HART�-capable. Its powerful data logger and the very large memory capacity support an individual in the subsequent documentation of the on-site calibration. The unit provides all the information relevant for verification.
Note
Detailed home elevators the model CPH8000 multi-function calibrators can be acquired on the WIKA website. Each instrument includes a modular design and will therefore be specified for the respective selection of applications. In case you have any more questions, your contact will gladly assist you to.

Leave a Reply