?Phew, I? Scam not gained anything!?: Aren?t you relieved whenever your bathroom scales show that? Probably ? but actually your bathroom scales don?t measure your bodyweight directly. Instead, the strain cell included in it converts the weight force into a path. In lots of industrial applications, bending beams and shear beams are often useful for such measurements.
Background: How is weight measured?
Whether your bathrooms scales, a finely calibrated laboratory balance or the gravimetric level monitor of a silo: In every cases, these are measuring instruments that determine a mass. Generally, they gauge the weight force occurring. But unlike, for example, a beam balance or a spring balance, the load cells used for this determine the weight force indirectly. For this purpose, these force transducers convert the weight force into a path.
The principle: In the load cell, the weight force deforms a built-in spring or a bending beam. The intensity of this deformation then gives information regarding your weight, for example (more precisely about your bodyweight force). Sufficient reason for that, it also answers the question of whether you can still order a dessert or just start thinking about a diet.
The ?core? of bending beams and shear beams
The different design stages of force transducers in weighing technology: shear beam, bending beam, single-point and S force transducer.
How can you determine how far the measuring bodies of a bending beam or shear beam load cell deform? At this point special strain gauges or thin-film sensors enter into play. These are mounted on or mounted in the measuring bodies. In the measurement process, they become a mechanical intermediate stage.
Exemplory case of strain gauges: These are glued to the measuring body. If the measuring body deforms, this is transferred to any risk of strain gauges. These convert the elastic deformations proportionally into electrical signals. Such changes in resistance can be easily and incredibly accurately measured: with a measurement accuracy of between 0.01 % and 0.05 % Fnom. The calibration is made in grams, kilograms or tons.
Instead of these glued foil strain gauges, there are force transducers with welded-in thin-film sensors: a technology that the WIKA Group excels in and with which, in the field of force measurement, it is the only supplier out there. The thin-film technology supplies a consistently high quality, an exact measurement directly in the force flow, very good temperature characteristics and a higher long-term stability. With bending beams and shear beams, the standardised sensor is welded into the measuring element utilizing a laser, which enables automated series production.
Unconventional for bending beams and shear beams
Bending beams and shear beams are employed in weighing technology to determine the weight of small and medium-sized vessels and are also frequently used in effect measurement. In agricultural engineering, for example, such load cells are frequently encountered: for example, when weighing livestock, dosing animal feedstuff, in gravimetric level tabs on vessels and silos or for weighing straw or hay bales directly in the baling press.
But also beyond these fields of application, bending beams and shear beams may be used in a wide selection of other ways: for example, in traditional weighing machine construction, platform weighing (platform scales), weighing in process and dosing systems, vessel scales, crane scales and truck scales. Specifically, in applications in the building materials industry, the chemical industry, the food industry and medical technology, bending beams and shear beams tend to be installed.
Practical example: Level monitoring with bending beam or shear beam load cells
Checking fill levels by measuring the weight of the vessel and contents: The filling height of a vessel or tank could be calculated from the measured data of this gravimetric level monitoring. This measurement method supplies a number of advantages:
Level and the exact mass could be measured as well.
Usage of the tank or vessel is not required (this eliminates connection with the medium).
The measurement is independent of the material, its properties and the geometry of the container.
The bending beam or shear beam could be easily replaced if necessary.
In level measurement, the strain cells must function regardless of the nature and condition of the media. Liquid or solid, aggressive, conductive or non-conductive, forming foam or dust, steaming, hot or cold, with small or large grain size, whatever the geometry of the vessel and whether the medium in the vessel is evenly or unevenly distributed: Such factors should never affect the measuring result and the permanent function. This applies in temperature-critical applications and where robustness and high durability are needed ? for example in the steel industry.
Shear beams and bending beams in the agricultural industry
In another practical example, stainless steel sparkles too: In the agricultural industry bending beams for weighing are very much popular. When sowing or fertilising, for example, a lot of money can be saved through the precise distribution of the products. The basis because of this, as is definitely the case with automation, are exact measured values, which explains why high-precision shear beams (which may also be insensitive to side loads) are perfectly suited.
Bending beams, shear beams along with other load cells: versatile problem solvers
Bending and shear beams are being among the most popular load cells. With respect to the field of application, you can find other force transducers that can be used. Our program includes load cells designed for ranges between 0.3 kg and 300 t.
Single point load cells. They are found in weighing technology for platform scales with smaller and medium sizes. They are also known as ?single points? and are also ideal for eccentric load introductions.
Responsive . Just like heavy-duty load cells, they’re tailored to the weighing of medium and large vessels and silos. The force introduction is just as easy as the installation; furthermore, the design is robust.
Tension/compression force load cells. These are mainly used for weighing suspended loads. Measurement is manufactured directly in the force path; in addition, the installation is uncomplicated.
Note
Further information on the product range for force measurement, e.g. our bending beams and shear beams, are available on the WIKA website.
See also our article
Load pins: Definition and application areas